Il router cellulare RUT360 è l’evoluzione del RUT240, il best seller di sempre di Teltonika Networks. Questo router industriale permette la connessione ad internet tramite rete cellulare 4G e 3G, Wi-Fi e connettività cablata. Il router RUT360 è dotato di 1 porta LAN e 1 porta WAN, 802.11 b/g/n WiFi, modulo cellulare 4G LTE Cat 6 e offre una velocità fino a 300 Mbps. Le esclusive funzioni di programmazione, monitoraggio remoto e sicurezza rendono RUT360 perfetto per le applicazioni IoT e M2M, dove la connettività sicura e affidabile è un must. La funzionalità di aggregazione della banda rende questo dispositivo compatto insostituibile in aree o applicazioni in cui la velocità dei dati cellulari è limitata.
Mobile
- Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
- Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
- SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
- Black/White List Operator black/white list
- USSD Supports sending and reading Unstructured Supplementary Service Data messages
- Multiple PDN Possibility to use different PDNs for multiple network access and services
- Band Managment Band lock, Used band status display
- APN Auto APN
- Bridge Direct connection (bridge) between mobile ISP and device on LAN
Wireless
- Wireless Mode 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
- Wi-Fi Security WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
- ESSID ESSID stealth mode
- Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden
Ethernet
- WAN 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
- LAN 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
Network
- Routing Static routes, Dynamic routes
- Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
- VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection Monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall Port forwards, traffic rules, custom rules
- DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
- QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS Supported >25 service providers, others can be configured manually
- Load Balancing Balance Internet traffic over multiple WAN connections